msgbartop
Productive Shopping For Digital Cameras
msgbarbottom

21 Sep 08 Terminology - Digital Cameras

Author: Sinta Makah

It helps when learning to use your new to also know what some of the more common terms mean. Below you will find many of these common terms defined..
— A setting that sets the focus, exposure and white-balance automatically.
Burst Mode or Continuous Capture Mode — a series of taken one after another at quickly timed intervals with one press of the shutter button.
Compression — The process of compacting digital data, and text by deleting selected information.
Digital — Cropping and magnifying the center part of an image.
JPEG — The predominant format used for in
Lag Time — The pause between the time the shutter button is pressed and when the camera actually captures the image

LCD — (Liquid-Crystal Display) is a small screen on a for viewing .

Lens — A circular and transparent glass or plastic piece that has the function of collecting light and focusing it on the sensor to capture the image.
Megabyte — (MB) Measures 1024 Kilobytes, and refers to the amount of information in a file, or how much information can
be contained on a Card, Hard Drive or Disk.
Pixels — Tiny units of color that make up digital . Pixels also measure digital . One million pixels
adds up to one mega-.
RGB — Refers to Red, Green, Blue colors used on computers to create all other colors.
— Camera describes the number of pixels used to create the image, which determines the amount of
detail a camera can capture. The more pixels a camera has, the more detail it can register and the larger the can be
printed.
Card — The removable device which holds taken with the camera, comparable to , but much smaller. Also called a card…
— The optical “window” to look through to compose the scene.
— White balancing adjusts the camera to compensate for the type of light (daylight, fluorescent, incandescent, etc.,) or lighting conditions in the scene so it will look normal to the human eye.

Related posts

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

19 Sep 08 Digital Camera Basics-resolution, Exposure, Focus, and Storage

Author: Brian Lee

The amount of detail that a camera can capture is called the , and it is measured in pixels. The more pixels a camera has, the more detail it can capture and the larger can be without becoming blurry or “grainy.” High-end can capture over 12 million pixels. Some support over 16 million pixels (), or 20 million pixels for large-format cameras. For comparison, it has been estimated that the quality of is about 20 million pixels.

Exposure and Focus

Just as with , a has to control the amount of light that reaches the sensor. The two components it uses to do this, the aperture and , are also present on .

Aperture: The size of the opening in the camera. The aperture is automatic in most , but some allow manual adjustment to give professionals and hobbyists more control over the final image.

: The amount of time that light can pass through the aperture. Unlike , the in a can be reset electronically, so have a digital shutter rather than a .

These two aspects work together to capture the amount of light needed to make a good image. In , they set the exposure of the sensor.

In addition to controlling the amount of light, the camera has to adjust the to control how the light is focused on the sensor. In general, the on are very similar to — some can even use conventional . Most use automatic focusing techniques.

The , however, is one important difference between the lens of a and the lens of a camera. The is the distance between the lens and the surface of the sensor. Sensors from different manufacturers vary widely in size, but in general they’re smaller than a piece of . In order to project the image onto a smaller sensor, the is shortened by the same proportion.

also determines the magnification, or , when you look through the camera. In cameras, a 50mm lens gives a natural view of the subject. Increasing the increases the magnification, and objects appear to get closer. The reverse happens when decreasing the . A lens is any lens that has an adjustable , and can have optical or digital — some have both. Some cameras also have macro focusing capability, meaning that the camera can take from very close to the subject.

have one of four types of :

1) Fixed-focus, fixed- - These are the kinds of on disposable and inexpensive cameras — inexpensive and great for , but fairly limited.

2) Optical- with automatic focus - Similar to the lens on a video camcorder, these have “wide” and “telephoto” options and automatic focus. The camera may or may not support manual focus. These actually change the of the lens rather than just magnifying the information that hits the sensor.

3) Digital- - With digital , the camera takes pixels from the center of the and interpolates (alters) them to make a full-sized image. Depending on the of the image and the sensor, this approach may create a grainy or fuzzy image. You can manually do the same thing with image processing software — simply snap a , cut out the center and magnify it.

4) Replaceable lens systems - These are similar to the replaceable on a camera. Some can use camera .

of

Most have an so you can view your right away. This is one of the great advantages of a — you get immediate feedback on what you capture. Of course, viewing the image on your camera would lose its charm if that’s all you could do. You want to be able to load the into your computer or send it directly to a printer. There are several ways to do this.

Although most of today’s cameras are capable of connecting through serial, parallel, SCSI, USB, or FireWire connections, they usually also use some sort of removable device. use a number of systems. These are like reusable, digital , and they use a caddy or card reader to transfer the data to a computer. Many involve fixed or removable . manufacturers often develop their own proprietary devices, including SmartMedia cards, cards and Sticks. Other removable device include floppy disks, hard disks (external, or microdrives), and writeable CD’s and DVD’s.

Regardless of what type of they use, all need lots of room for . They usually store in one of two formats — TIFF, which is uncompressed, and JPEG, which is compressed. Most cameras use the JPEG file format for storing , and they sometimes offer quality settings (such as medium or high).

To make the most of their space, almost all use some sort of additional data compression to make the files smaller. One compression routine takes advantage of patterns that repeat. The image can be reconstructed exactly as it was recorded, reducing the file size no more than 50%, often much less. Another compression routine called irrelevancy eliminates some of the more meaningless data, taking advantage of the fact that record more information than the human eye can easily detect.

Related posts

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,