msgbartop
Productive Shopping For Digital Cameras
msgbarbottom

20 Sep 08 Making the Most of Digital Camera Memory Cards

Author: John Pawlett

are revolutionizing the world of home and professional , but they are married to cards just as are married to . Making the best use of cards can have a very big impact on your enjoyment of digital . Choosing the right card for the job can be as important as choosing the right for a .

If you are new to , the cards are the most important parts of any , without which they may not work at all. So if you are handling a or planning a purchase, you must know more about the cards used in these cameras.

Something many new owners find counter-intuitive is that bigger is not always better with a digital card. The actual response speed of your can depend greatly on the card it is using. The speed that your camera writes new to the digital card is partially dependant on the transfer speed of the but is also dependant on factors in the card itself.

cards that have buffers can take the data into a faster type of and then transfer the data from there to the slower which provides the main of almost all cards. Some provide their own buffer to allow you to take your next while the previous is being transferred to the card.

When you delete an image from the card of your , the is reconfigured because of special issues having to do with how this stores data. Normally this is an issue that you don’t have to worry about at all. However, if you have a very large card and delete an image, you may experience a several minute delay while house cleaning is performed on the card. Because of this, do not delete while you are taking .

Instead wait until you are at home, your hotel or in the car before reviewing your and deleting the ones you don’t want. Smaller cards take less time for this house cleaning so many experienced owners will choose to have more than one medium sized card instead of one very large one.

Now the question arises-how many cards are enough for your camera? On an average basis, you must have at least two cards for your . That is, if you are using it in a normal and average fashion.

Most professional choose to carry about four to six cards. This helps them shoot smoothly and constantly. If they run out of , they just take the loaded card out and insert the fresh one. Because cards can malfunction (just like traditional canisters, but not as often), you should choose to have at least two cards at all times.

By having at least two cards, you can work with one and keep the other in reserve for emergency. Having at least one extra card for your will also ensure that you have the backup protection needed if you run out of space on your first card or in the possible event of the first card malfunctioning.

The next important issue is how to take proper care of these cards. The cards may seem like some small and fragile piece of technology, but they are actually fairly sturdy. The is encased in a stiff plastic shell which can withstand normal wear and handling. At one end of the card is either a set of little holes or copper strips. These are the sensitive part of the card. Any voltage source or a large jolt of static could corrupt the and probably cause permanent damage to the card. When the card is not in your camera, it is best to keep it stored in a protective case or in your . Putting it in your pocket could cause a short (from your keys perhaps) or dirty the electrical contracts.

There have been instances where the users have misbehaved greatly with them and the cards have yet survived and continued to function correctly. But, this does not mean that one should not care for them.

When it is time to transfer your data from the card to your PC, it is best to have a card reader, or have a PC with a built-in reader. The data cables provided with most are very slow compared to the speed of a direct reader and it is often easier to review, copy and delete from a card when using a reader instead of through the data cable connection.

When traveling, X-Rays have never been shown to corrupt the data on, or damage, a card. The card is also not magnetic in nature so the motors in the X-Ray machine’s conveyor belt should not be able to cause any harm either.

Armed with knowledge comes the power to benefit from that knowledge. If you have learned something new about digital cards, hopefully you will benefit by enjoying your more and finding more opportunities to take great .

Related posts

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,



Leave a Comment